Coatings for industrial areas
Industrial floor coverings must be individually adapted to the requirements of the respective sector or industry. Floors and walls in production or warehouse facilities have to meet a variety of different technical, but increasingly also visual demands in daily use. This guarantees a long service life of the flooring and resistance to high mechanical loads in everyday work.
In the construction of new industrial buildings and halls, the shortest possible time windows for floor installation should improve coordination with the other trades; in the renovation and maintenance of existing floor or wall surfaces, low downtimes should also interfere as little as possible with ongoing manufacturing processes.
KLB coating systems have all the product features required for occupational safety, such as the slip resistance classes according to DGUV 103-008 (in R9, R10, R11, R12, R13). An even, hard-wearing surface can be combined here with an attractive appearance and high performance.
Electrical discharge capability (ESD or EX protection) and battery room suitability as well as chemical resistance or the compliance with the Water Resources Act (German WHG) are just some of the requirements placed on an industrial reactive resin coating made of epoxy, polyurethane or acrylic resin (PMMA).
KLB coatings from the Rapid product range can significantly shorten the construction time and thus also the downtimes of ongoing operations. They ensure that production and storage areas have to be closed for much shorter periods in the event of renovation, which greatly reduces the loss of productivity. Special attention is paid to the aspects of occupational safety and employee health.
Why KLB Kötztal?
With the solvent-free and certified coating systems for industrial areas (production, warehouse, logistics, etc.) coordinated by our R&D department, KLB is a professional partner with many years of in-depth know-how at your side, regardless of the size of the project.
Thanks to their durability, good cleanability and excellent technical properties, KLB coatings are the best choice when it comes to an economical solution for your new construction or the renovation and maintenance of industrial properties.
Our sales consultants and technicians support you with their expertise and substantial know-how from the last 25 years of operation. The expert knowledge we have developed from the manufacturing of coating materials for commercial and industrial floors means we are also able to come up with out-of-the-ordinary solutions. KLB systems make it possible for building owners or architects to implement their very individual ideas.
Industrial application areas
Where should your coating be used?
Your production methods are as individual as your products. Modern assembly lines and operating processes that are coordinated down to the last detail need a solid foundation to make a strong impression, and not just on your customers. Coatings in production and manufacturing facilities – as mechanically highly resilient, durable floor coverings with robust properties – offer you just that. The individual requirements of the various industry sectors are more than met by KLB systems. Among other things, they are characterised by their ease of cleaning, slip resistance and transportability. For large-scale industrial, production or assembly halls, we at KLB have the perfectly matched system solutions when it comes to efficiency, flexibility and a strong performance.
Floor spaces in warehousing and logistics facilities are constantly exposed to high levels of stress by industrial trucks and the movement of pallets. Robustness and high resistance to wear and tear are important properties. The KLB floor systems in this category are particularly suitable for dealing with mechanical loads.
From hygienic reactive resin floors – jointless, smooth, easy to clean and disinfect, also set to be electrically conductive where necessary – through low-VOC floors for clean rooms over to coatings with good chemical resistance: KLB offers a suitable system for every laboratory.
KLB INDUSTRIAL EP Screed
Smooth epoxy resin mortar coating
Technical innovations are the igniting force behind every development. However, to prevent the spark from being ignited at the wrong moment, we offer you KLB systems that meet both safety requirements and your high production standards – be it conductivity in accordance with ESD specifications (electrostatic discharge) or explosion (EX) protection. Our coating systems are suitable, for example, for operating theatres with sensitive electronics or measuring equipment, server rooms, clean rooms in the semiconductor industry, production areas of electronic components in electrical engineering or in the chip industry. Just like us, our coatings are reliably grounded partners in chemical-technical production and storage facilities where explosion protection guidelines must be observed.
KLB CONDUCTIVE EP EX Standard
Smooth, electrical conductive epoxy resin coating with EX protection
KLB CONDUCTIVE EP ESD Standard
Smooth, light-coloured and homogeneously conductive epoxy resin coating for increased requirements in ESD areas
KLB CONDUCTIVE EP ESD Exclusive
Smooth, light-coloured, homogeneously conductive epoxy resin coating for requirements in ESD areas
"Time is Money": to live up to this slogan, we offer you a wide range of KLB systems with very fast curing that can be quickly subjected to mechanical or chemical loads again. Surfaces can be put back into service within short time (only a few hours, depending on the system) and costs are significantly reduced due to the minimal downtime. Rapid reusability is the main requirement for our specially developed "Rapid" range of epoxy, polyurethane and acrylic resins. They stand our for their appearance and robustness, while offering calculable time windows for installation and thus minimal operational interruptions. Especially for renovation and maintenance, manufacuturing processes are only briefly interrupted and ongoing operations are not disturbed. Due to the particularly good processing quality of the material, partial areas can also be reworked and renovated during running production.
KLB INDUSTRIAL PU RX Rapid
Very rapid-setting polyurethane resin coating, light-stable and slip-resistant
KLB INDUSTRIAL PMMA RX
Rapid-setting, slip-resistant PMMA coating for wet areas
KLB INDUSTRIAL DECOR PMMA
Rapid-setting, slightly slip-resistant PMMA decorative coating for dry areas
"The chemistry has to be right – also between the floor coating and the specification profile. Here it is our task to offer you the perfect solution for every requirement. Chemical substances and their effects on floor coverings are strongly dependent on the concentration of the respective substance as well as the exposure time. KLB Kötztal actively supports you in all questions of chemical resistance. Years of experience with coating materials for chemical production and storage areas make us a reliable partner when it comes to recommending chemical-resistant floorings. No matter whether it's WHG-certified coating systems, special solutions for electroplating plants or floor coverings exposed to fuels, oil, engine oil, water, solvents, alkalis, saline solutions as well as mineral acids and other chemicals.
KLB PROTECT WHG EP
Chemical-resistant epoxy resin coating for water protection (WHG) with approval according to DIBt (building authority approval)
Let out floors inspire you
Have a go at designing your ideal floor! Or get to know the differences and strengths of our various floor systems
Configure your individual floor system so it is tailored to your project’s specific demands. If there should be several options available, you can compare the systems in more detail.Get to the System Finder
KLB floor systems do not only offer a wide variety and choice of functional solutions. Also when it comes to visual appearance, there are hardly any limits set to your creativity and individuality. Just get in and try it out. Have fun!Get to the Floor Designer
Always at your service with professional advice
If you still have questions about our products or systems – please contact us. We will get in touch with you immediately.
Our competent KLB team will be happy to provide you with quick and straightforward personal advice on our coating systems.
+49 8223 96 92 0
+49 8223 96 92 222
Hotline for technical enquiries
+49 8223 96 92 333
+49 8223 96 92 777
Hotline to our export department
+49 8223 96 92 239
To present their production facilities and machines, Schüco needed a suitable floor covering that could withstand mechanical loads. In harmony with the corporate design, the floor...
Both the floor itself and the environment must be protected by a suitable coating when water-polluting chemicals are handled at freight forwarding service provider Logwin.
An industrial floor covering was required that would support both the storage and production processes at the natural remedy manufacturer as well as to withstand the high mechanica...
For the reception and office area of a car body shop, a floor covering was needed that matched the overall concept. The floor had to harmonise with the modern look of the red surfa...