System A3
KLB INDUSTRIAL EP RX

Scattered and non-slip epoxy resin coating

Build-up of system

  1. Top sealer KLB-SYSTEM EPOXID EP 216 Universal
  2. Top coat KLB-SYSTEM EPOXID EP 216 Universal – fully scattered with quartz sand
  3. Primer KLB-SYSTEM EPOXID EP 50

System description

The coating system A3 is mainly used for commercial and industrial floorings with medium mechanical load, especially when there is a higher need for slip-resistance. Depending on the formulation, anti-slip grades of between R11 and R13 can be produced. 

The main areas of application are production or warehouse facilities in commercial and industrial operations, often with wet exposure. 

Alternative systems: System A1 for a lower slip-resistance, System A5 for higher demands on mechanical load.

Properties

  • slip-resistant in R11
  • slip-resistant in R12/R13
  • glossy
  • resistant to chemicals
  • structured
  • rigid
  • resistant to mechanical load
  • impervious to fluids
  • resistant to hot water up to 65 °C / 149 °F

Build-up of system – single products used

Each of our coating systems is a combination of perfectly matched products.

KLB-SYSTEM EPOXID EP 50

Solvent-free, transparent, all-purpose 2-component epoxy resin for producing primers and scratch coats as well as mortar and levelling layers.

KLB-Mischsand 2/1

Standard filling sand mixture for scratch coats and as an additive to unfilled coating systems based on epoxy or acrylic resins, such as for EP 99, AC 313, AC 320, AC 390.

KLB-SYSTEM EPOXID EP 216 Universal

Universal, self-levelling and solvent-free 2-component epoxy resin coating for smooth surfaces or as base layer and top sealer for scattered coatings. Tested as surface protection ...

KLB-SYSTEM KLB-Quarzsand 0.3/0.8 mm

Fire-dried, graded quartz sand in graduated grain sizes to be used as filling material for reactive resin works and coatings.

Always at your service with professional advice

If you still have questions about our products or systems – please contact us. We will get in touch with you immediately.

Phone

Our competent KLB team will be happy to provide you with quick and straightforward personal advice on our coating systems.

General enquiries
+49 8223 96 92 0

Order hotline
+49 8223 96 92 222

Hotline for technical enquiries
+49 8223 96 92 333

Sales service
+49 8223 96 92 777

Hotline to our export department
+49 8223 96 92 239











    *Recommended
    Sample tenders for our coating systems.

    Making work a little easier: Ausschreiben.de provides you with a large number of prepared tender documents for every project type and requirement.

    Get to Ausschreiben.de
    Bildschirm-Screenshot des Produktfinders auf der Homepage vor blauem Hintergrund

    IMPORTANT NOTICE FOR USERS OF THE INTERNET EXPLORER
    The website is not optimised for use in your browser. This results in display errors and limited functionality. We recommend that you use one of the following free browsers for unrestricted use of our website.