Offices and public facilities

The challenge

More and more often, the floors in offices, museums and other public institutions are being fitted with jointless coatings which can give the floors an extremely elegant touch: an aesthetically pleasing appearance and good durability are of particular importance in such environments. Thanks to our variety of high-quality coating materials, floor coverings can be produced in many colours and surface structures for achieving exactly the right degree of slip-resistance. As the legal requirements specify that building materials must not contain any substances harmful to health, only low-emission coatings and top-sealers should be used. Careful processing can produce very appealing surfaces.

The solution

High-quality, low-emission coatings based on 2-component polyurethane resins with good colour stability are particularly ideal for creating decorative floors. Finishing the flooring with a low-emission top sealer can produce very visually attractive surfaces. Our coating systems can also be used for swipe techniques. We create floors that are extremely comfortable to walk on and offer improved impact sound. The systems are rounded off with suitable low-emission primers.

Why KLB Kötztal?

For more than 15 years, KLB Kötztal has been developing low-emission reactive resin coatings. Since 2011, recreation rooms have been required to be only fitted with these products. Today, we have a comprehensive range of low-emission and sustainable coatings for just such applications. Reduced-emission products also comply with the requirements for building certifications such as LEED, DGNB, Minergie Eco or BREEAM. The coatings are certified and audited by Eurofins Consumer Product Testing GmbH, a leading global institute. Approved by Eurofins, they carry the label “Indoor Air Comfort” or “Indoor Air Comfort Gold”, meaning they also meet the requirements of various European countries.

Low-emission coatings
Low-emission coatings

According to the European Construction Products Regulation (CPR), it is essential to use building materials that pose no risk to human health in areas in which people gather for longer periods. The formulation of low-emission floor coverings with extremely low VOC levels ("volatile organic compounds") ensures compliance with these requirements.

System C5
KLB LOW-VOC DECOR EP RX

Antislip, decorative and low-emissoin epoxy resin scattered coating

System G3
KLB INDUSTRIAL LOW-VOC PU Comfort Sealed

Slightly non-slip, low-emission polyurethane resin comfort coating

System G4
KLB INDUSTRIAL LOW-VOC PU Elastic Sealed

Slightly non-slip, elastic, low-emission polyurethane resin coating

System G7
KLB DECOR LOW-VOC PU Light Sealed

Low-emission, coloured, decorative polyurethane resin coating

Trade and presentation
Trade and presentation

For a successful promotion of products, economic assets or exhibits, floor surfaces in retail and presentation areas are a key design element. Our coating systems mean that we have just the right products for exactly this use in showrooms.

System A8 
KLB INDUSTRIAL EP Structured

Smooth and structured epoxy resin for floor and wall coatings

System C1
KLB LOW-VOC EP Standard

Smooth, low-emission epoxy resin coating

System C2
KLB LOW-VOC EP RX

Slip-resistant, low-emission epoxy resin coating

System C5
KLB LOW-VOC DECOR EP RX

Antislip, decorative and low-emissoin epoxy resin scattered coating

Office and administration
Office and administration

Jointless coatings are increasingly being used as design elements. When applied correctly, synthetic resin coatings are also ideally suited for office areas, administrative buildings, etc. Since many people gather in these spaces for long periods of time, the coverings must be particularly low-emission. Their mechanical load-bearing capacity is to be designed to cope with increased public traffic and also with chair castors or furniture feet and legs. A moderate level of slip-resistance and a good cleanability make them a modern solution for offices and public facilities.

System A10
KLB TECH EP Anti-Radon

Low-emission epoxy resin sealant for radon-proofing

System C1
KLB LOW-VOC EP Standard

Smooth, low-emission epoxy resin coating

System C2
KLB LOW-VOC EP RX

Slip-resistant, low-emission epoxy resin coating

System C5
KLB LOW-VOC DECOR EP RX

Antislip, decorative and low-emissoin epoxy resin scattered coating

Public facilities
Public facilities

High public footfall and frequent cleaning are the main requirements for floors in public facilities. The KLB covering systems offer an aesthetically pleasing and yet durable floor with good cleaning properties and adjustable slip-resistance.

System A10
KLB TECH EP Anti-Radon

Low-emission epoxy resin sealant for radon-proofing

System C1
KLB LOW-VOC EP Standard

Smooth, low-emission epoxy resin coating

System C2
KLB LOW-VOC EP RX

Slip-resistant, low-emission epoxy resin coating

System C5
KLB LOW-VOC DECOR EP RX

Antislip, decorative and low-emissoin epoxy resin scattered coating

Museum
Museum

Museums are areas in which many people stay for long periods of time. Low-emission reactive resin coverings can offer an economical and decorative solution.

System C1
KLB LOW-VOC EP Standard

Smooth, low-emission epoxy resin coating

System C2
KLB LOW-VOC EP RX

Slip-resistant, low-emission epoxy resin coating

System C5
KLB LOW-VOC DECOR EP RX

Antislip, decorative and low-emissoin epoxy resin scattered coating

System G10
KLB DECOR LOW-VOC PU Glitter Effect

Smooth, decorative, low-emission, light-stable polyurethane resin effect covering

Living
Living

In the domestic sector, decorative coatings are often installed in a wide range of colours and also with a suitable level of comfort. Low-emission KLB coating systems with a highly attractive surface and good cleanability are used in most of these cases. Almost any product combination is feasible – also with properties to improve the impact sound and walking comfort.

System A10
KLB TECH EP Anti-Radon

Low-emission epoxy resin sealant for radon-proofing

System C1
KLB LOW-VOC EP Standard

Smooth, low-emission epoxy resin coating

System C2
KLB LOW-VOC EP RX

Slip-resistant, low-emission epoxy resin coating

System C5
KLB LOW-VOC DECOR EP RX

Antislip, decorative and low-emissoin epoxy resin scattered coating

Spa and fitness
Spa and fitness

Wellness and fitness facilities require floor coverings that – depending on the requirements – are hygienic, very cleanable, potentially also water-resistant, and still look aesthetically pleasing. In some applications, walking comfort and improved impact sound can be advantageous. In damp or wet areas, the coverings must be sufficiently non-slip.

System C5
KLB LOW-VOC DECOR EP RX

Antislip, decorative and low-emissoin epoxy resin scattered coating

System G3
KLB INDUSTRIAL LOW-VOC PU Comfort Sealed

Slightly non-slip, low-emission polyurethane resin comfort coating

System G4
KLB INDUSTRIAL LOW-VOC PU Elastic Sealed

Slightly non-slip, elastic, low-emission polyurethane resin coating

System G7
KLB DECOR LOW-VOC PU Light Sealed

Low-emission, coloured, decorative polyurethane resin coating

Decoration and design
Decoration and design

Reactive resin floors offer a wide range of individual colours and surface structures. Colourful floors can be created with swipe techniques, special pigments or metallic effects and inlays, and many more. The coverings are unconventional, unique and highly customisable. The floor becomes a feature! KLB systems offer a large selection of decorative designs.

System C1
KLB LOW-VOC EP Standard

Smooth, low-emission epoxy resin coating

System C2
KLB LOW-VOC EP RX

Slip-resistant, low-emission epoxy resin coating

System C5
KLB LOW-VOC DECOR EP RX

Antislip, decorative and low-emissoin epoxy resin scattered coating

System G10
KLB DECOR LOW-VOC PU Glitter Effect

Smooth, decorative, low-emission, light-stable polyurethane resin effect covering

Let out floors inspire you

Have a go at designing your ideal floor! Or get to know the differences and strengths of our various floor systems

A customised floor system for your project.

Configure your individual floor system so it is tailored to your project’s specific demands. If there should be several options available, you can compare the systems in more detail.

Get to the System Finder
Try out and find your favourite design.

KLB floor systems do not only offer a wide variety and choice of functional solutions. Also when it comes to visual appearance, there are hardly any limits set to your creativity and individuality. Just get in and try it out. Have fun!

Get to the Floor Designer
Bildschirm-Screenshot des Produktfinders auf der Homepage vor blauem Hintergrund

Always at your service with professional advice

If you still have questions about our products or systems – please contact us. We will get in touch with you immediately.

Phone

Our competent KLB team will be happy to provide you with quick and straightforward personal advice on our coating systems.

General enquiries
+49 8223 96 92 0

Order hotline
+49 8223 96 92 222

Hotline for technical enquiries
+49 8223 96 92 333

Sales service
+49 8223 96 92 777

Hotline to our export department
+49 8223 96 92 239











    *Recommended

    References

    Besprechungsraum im Architekturbüro mit neu saniertem Bodenbelag mit Massversiegelung
    Floor renovation at HKR+ architectural office

    For the new floor coating at HKR+ Partner Architects, it was necessary to take account of health and sustainability requirements when choosing the right coating product. A holistic...

    • Offices and public facilities
    KLB dekorativer Bodenbelag im Loungebereich im Bürogebäude Antwerp Tower
    Antwerp Tower (part 4): Offices and lounges

    The wiping technique creates unique visual effects that define the room and give it a very personal touch. PU 410 has established itself as a key product especially for this type o...

    • Offices and public facilities
    Besprechungsraum im Antwerp Tower mit einzigartigem Designbelag durch integrierte Papierschnipsel
    Antwerp Tower (part 3): Meeting rooms and hallways

    The main objective of the floor coating for this particular project was to create a unique and distinctive look: it had to be not only visually appealing, but also hard-wearing and...

    • Offices and public facilities
    Olivegrüner Sitzbereich mit farblich perfekt abgestimmtem Designboden
    Antwerp Tower (part 2): Seating areas and a coffee corner

    With regard to visitor traffic, a lower resistance to mechanical loads was required. Cleanability also played an important role, as did hygiene – particularly in the coffee kitc...

    • Offices and public facilities

    IMPORTANT NOTICE FOR USERS OF THE INTERNET EXPLORER
    The website is not optimised for use in your browser. This results in display errors and limited functionality. We recommend that you use one of the following free browsers for unrestricted use of our website.