System C2
KLB LOW-VOC EP RX

Slip-resistant, low-emission epoxy resin coating

Build-up of system

  1. Top sealer with KLB-SYSTEM EPOXID EP 202
  2. Top coat KLB-SYSTEM EPOXID EP 202, fully scattered with KLB quartz sand
  3. Scratch coat with KLB-SYSTEM EPOXID EP 57 and mixed sand KLB-Mischsand 2/1
  4. Primer with KLB-SYSTEM EPOXID EP 57

System description

The low-emission coating system C2 results in a low-emission and slip-resistant covering in R11 for surfaces with low to medium loads. 

Areas of application are, for example, production or storage facilities and, due to the low-emission properties, also recreation rooms and many other economic sectors. 

The system complies with the requirements posed by Indoor Air Comfort Gold Label version 6.0 (2017) which guarantees regular testing and confirmation of the system’s low emissions. The components of this build-up have been certified for sustainable building according to DGNB, LEED or Minergie ECO.

Alternative systems: System C1 for areas where no slip-resistance is required.

Properties

  • slip-resistant in R11
  • low-VOC (AgBB)
  • glossy
  • application area – Indoor
  • rigid
  • resistant to mechanical load
  • impervious to fluids
  • resistant to hot water up to 65 °C / 149 °F

Build-up of system – single products used

Each of our coating systems is a combination of perfectly matched products.

KLB-SYSTEM EPOXID EP 57

Low-emission, all-purpose 2-component epoxy resin for base and scratch coats or as levelling mortar for renovations or new floors. Combined with EP 202, it is tested according to&#...

KLB-Mischsand 2/1

Standard filling sand mixture for scratch coats and as an additive to unfilled coating systems based on epoxy or acrylic resins, such as for EP 99, AC 313, AC 320, AC 390.

KLB-SYSTEM EPOXID EP 202

Low-emission, coloured 2-component epoxy resin coating for hard and smooth surfaces or as top sealer for industrially used scattered coatings. Tested in combination with ...

KLB-SYSTEM KLB-Quarzsand 0.3/0.8 mm

Fire-dried, graded quartz sand in graduated grain sizes to be used as filling material for reactive resin works and coatings.

Always at your service with professional advice

If you still have questions about our products or systems – please contact us. We will get in touch with you immediately.

Phone

Our competent KLB team will be happy to provide you with quick and straightforward personal advice on our coating systems.

General enquiries
+49 8223 96 92 0

Order hotline
+49 8223 96 92 222

Hotline for technical enquiries
+49 8223 96 92 333

Sales service
+49 8223 96 92 777

Hotline to our export department
+49 8223 96 92 239











    *Recommended
    Sample tenders for our coating systems.

    Making work a little easier: Ausschreiben.de provides you with a large number of prepared tender documents for every project type and requirement.

    Get to Ausschreiben.de
    Bildschirm-Screenshot des Produktfinders auf der Homepage vor blauem Hintergrund

    IMPORTANT NOTICE FOR USERS OF THE INTERNET EXPLORER
    The website is not optimised for use in your browser. This results in display errors and limited functionality. We recommend that you use one of the following free browsers for unrestricted use of our website.