System M1
KLB INDUSTRIAL PMMA RX

Rapid-setting, slip-resistant PMMA coating for wet areas

Belagsaufbau des Systems M1 mit Nummerierung

Build-up of system

  1. Top sealer KLB-SYSTEM ACRYL AC 826
  2. Base layer with KLB-SYSTEM ACRYL AC 313 and mixed sand KLB-Mischsand 2/1, fully scattered with coloured quartz sand KLB-Colorquarzsand 0.7/1.2 mm
  3. Primer KLB-SYSTEM ACRYL AC 20, openly scattered with quartz sand KLB-Quarzsand 0.7/1.2 mm

System description

The coating system M1 complies with many requirements on commerical or industrial floors, especially for wet areas that require rapid curing times. The formulation with PMMA binding agents enables a very fast hardening of the individual system layers – which reduces the installation time to a minimum, compared to conventional epoxy or polyurethane resin coatings.

This makes the system particularly suitable for areas where short downtimes and rapid installation or renovation are required.

Alternative systems: System H3 as kitchen floor with sealing layer, System M2 as decorative version for dry areas.

Areas of application

  • Agriculture: Animal husbandry and feeding tables
  • Agriculture: Milking parlours and milk rooms
  • Foodstuffs: Cold storage and deep-freezing rooms
  • Foodstuffs: Commercial kitchens
  • Industry: Manufacturing and production
  • Industry: Storage and logistics
  • Special solutions: Rapid-setting coatings

Properties

  • Slight slip-resistance R9/R10
  • Slip resistance rating R11
  • Slip resistance rating R12/R13
  • Rapid-setting
  • Glossy
  • Resistant to chemicals
  • Structured
  • Rigid
  • Resistant to mechanical load
  • Resistant to hot water up to 65 °C/149 °F

Build-up of system - single products

Each of our coating systems is a combination of perfectly matched products

Kanister mit Komponente A von KLB-SYSTEM ACRYL AC 20 Grundierung
KLB-SYSTEM ACRYL AC 20

Low-viscosity, rapid setting PMMA base coat for mineral substrates and subsequent PMMA coatings.  Please order hardener compound separately. 

Kanister mit Komponente A von KLB-SYSTEM ACRYL AC 313
KLB-SYSTEM ACRYL AC 313

Rapid-setting, flexible PMMA coating resin for scattered coatings in wet areas. The coating is produced by adding hardener powder, pigments for colouring and KLB-Mischsand 2/1....

KLB-Mischsand 2/1

Standard filling sand mixture for scratch coats and as an additive to unfilled coating systems based on epoxy or acrylic resins, such as for EP 99, EP 100 VS, AC 313, AC 320, AC 39...

Kanister mit Komponente A von KLB-SYSTEM ACRYL AC 826 Versiegelungsharz
KLB-SYSTEM ACRYL AC 826

Rapid-setting, low-viscosity 2-component PMMA resin with low tendency for yellowing. The resin can be used for sealing scattered slip-resistant coatings in wet areas. Especial...

Always at your service with professional advice

If you still have questions about our products or systems – please contact us. We will get in touch with you immediately.

Phone

Our competent KLB team will be happy to provide you with quick and straightforward personal advice on our coating systems.

General enquiries
+49 8223 96 92 0

Order hotline
+49 8223 96 92 222

Hotline for technical enquiries
+49 8223 96 92 333

Sales service
+49 8223 96 92 777











    *Recommended

    Tenders

    Sample tenders for our coating systems.

    Making work a little easier: Ausschreiben.de provides you with a large number of prepared tender documents for every project type and requirement.

    Get to Ausschreiben.de
    Bildschirm-Screenshot des Produktfinders auf der Homepage vor blauem Hintergrund

    IMPORTANT NOTICE FOR USERS OF THE INTERNET EXPLORER
    The website is not optimised for use in your browser. This results in display errors and limited functionality. We recommend that you use one of the following free browsers for unrestricted use of our website.