A car workshop fitted with a robust but visually appealing epoxy resin floor
"Der Autodoktor" – Karosserie Eisemann GmbH in a harmonious overall colour scheme.
Assignment and requirements
A colour-coordinated overall concept had to be designed for the company Karosserie Eisemann GmbH. As large windows allow to see the workshop area from the reception, the task was to combine a robust epoxy resin coating with a high-quality look – while also fulfilling the technical standards.
Particularities and challenges
Floors in car workshops have to withstand both chemical and mechanical loads. This project required a system that would also convince through an aesthetically pleasing surface, which could be achieved by scattering with partiColor® chips. The abrasion resistance of the surface was to be optimised with a matt sealer.
The solution
System A5 KLB INDUSTRIAL EP RX Robust has good mechanical resistance and is impervious to water, saline solutions, alkalis, mineral oils and fuels, as well as to various solvents. It is also well suited for higher optical demands by scattering the surface with partiColor® chips. The matt sealing with KLB-SYSTEM EPOXID EP 860 further increases the chemical stability of the system.
The Project
Category: Car workshop
Area size: 1,800 m²
Area type: Workspaces of a car repair and paint shop
Completion: September 2017
Build-up of system
- Matt sealer KLB-SYSTEM EPOXID EP 860
- Top sealer KLB-SYSTEM EPOXID EP 175 Spezial
- Top coat KLB-SYSTEM EPOXID EP 99 and mixed sand KLB-Mischsand 3/1, scattered with coloured quartz sand
- Primer KLB-SYSTEM EPOXID EP 50, openly scattered with quartz sand KLB-Quarzsand 0.7/1.2 mm
Let our floors inspire you
Have a go at designing your ideal floor! Or get to know the differences and strengths of our various floor systems
Configure your individual floor system so it is tailored to your project’s specific demands. If there should be several options available, you can compare the systems in more detail.
Get to the System FinderKLB floor systems do not only offer a wide variety and choice of functional solutions. Also when it comes to visual appearance, there are hardly any limits set to your creativity and individuality. Just get in and try it out. Have fun!
Get to the Floor DesignerMore references
The steel structure of this multi-storey car park is particularly vulnerable to frost and the ingress of de-icing salts, i.e. chloride. To prevent cracking and corrosion, an OS 11a...
The surface protection system in the underground car park of the My Arbor spa hotel must not only withstand the heavy mechanical loads caused by cars, but also ensure safe manoeuvr...
Due to the increased risk of cracking, we had to install a dynamically crack-bridging surface protection coating to withstand penetrating liquids or chemicals such as de-icing salt...
Since the surfaces are used for different purposes, they had to contrast with each other in terms of colour; part of them was sealed with a matt finish. At the same time, the floor...