System G13
KLB DECOR PU RX ColorQ

Slip-resistant, decorative polyurethane resin coating with high-gloss top sealant

Build-up of system

  1. Top sealer KLB-SYSTEM POLYURETHAN PU 484
  2. Top coat with KLB-SYSTEM EPOXID EP 99 and mixed sand KLB-Mischsand 3/1, fully scattered with KLB coloured sand CQS-46xx
  3. Scratch coat with KLB-SYSTEM EPOXID EP 50 and mixed sand KLB-Mischsand 2/1
  4. Primer KLB-SYSTEM EPOXID EP 50, openly scattered with KLB quartz sand

System description

The coating system G13 complies with all requirements on hard-elastic, antislip and decorative floor coatings with a slip-resistance grade of R11 to R13. It is designed to withstand lower to medium mechanical stresses and is mainly used for substrates susceptible for deformation, such as mastic asphalt, metal, wood or mixed substrates.

The chemical composition of the system does not provide any stability against yellowing. However, this can be avoided by applying a colour-stable top sealer. Please contact our field service or the technical sales team for further information about a change in anti-slip properties.

Alternative systems: System G6 in a rapid-setting and plain-coloured version, System G5 without any demands on visual appearance.

Properties

  • slip-resistant in R11
  • glossy
  • application area – Indoor
  • structured
  • decorative
  • rigid
  • resistant to mechanical load
  • impervious to fluids

Build-up of system – single products used

Each of our coating systems is a combination of perfectly matched products.

KLB-SYSTEM EPOXID EP 57

Low-emission, all-purpose 2-component epoxy resin for base and scratch coats or as levelling mortar for renovations or new floors. Combined with EP 202, it is tested according to&#...

KLB-SYSTEM EPOXID EP 99

Unfilled, pre-formulated, pigmented 2-component epoxy resin coating that produces smooth and scattered coatings when used in combination with mixed sand KLB-Mischsand 2/1...

KLB-SYSTEM KLB-Quarzsand 0.3/0.8 mm

Fire-dried, graded quartz sand in graduated grain sizes to be used as filling material for reactive resin works and coatings.

KLB-SYSTEM POLYURETHAN PU 484

High-quality, transparent and light-resistant 2-component polyurethane resin for use as a top sealer on slip-resistant coloured sand scattered coatings and as a clear resin layer o...

Always at your service with professional advice

If you still have questions about our products or systems – please contact us. We will get in touch with you immediately.

Phone

Our competent KLB team will be happy to provide you with quick and straightforward personal advice on our coating systems.

General enquiries
+49 8223 96 92 0

Order hotline
+49 8223 96 92 222

Hotline for technical enquiries
+49 8223 96 92 333

Sales service
+49 8223 96 92 777

Hotline to our export department
+49 8223 96 92 239











    *Recommended
    Sample tenders for our coating systems.

    Making work a little easier: Ausschreiben.de provides you with a large number of prepared tender documents for every project type and requirement.

    Get to Ausschreiben.de
    Bildschirm-Screenshot des Produktfinders auf der Homepage vor blauem Hintergrund

    IMPORTANT NOTICE FOR USERS OF THE INTERNET EXPLORER
    The website is not optimised for use in your browser. This results in display errors and limited functionality. We recommend that you use one of the following free browsers for unrestricted use of our website.