System G5
KLB INDUSTRIAL PU RX

Slip-resistant polyurethane resin coating

Build-up of system

  1. Top sealer KLB-SYSTEM POLYURETHAN PU 421
  2. Top coat KLB-SYSTEM POLYURETHAN PU 421, fully scattered with KLB quartz sand
  3. Primer KLB-SYSTEM EPOXID EP 50, openly scattered with KLB quartz sand

System description

The coating system G5 fulfills all demands on hard-elastic and antislip floor coatings with a slip-resistance grade of R11-R13. It is designed to withstand lower to medium mechanical stresses and is mainly used for substrates susceptible to deformation, such as mastic asphalt, metal, wood or mixed concrete.

The chemical composition of the system does not provide any stability against yellowing. However, this can be avoided by applying a colour-stable top sealer. Please contact our field service or the technical sales team for further information about a change in anti-slip properties.

Alternative systems: System G6 in a rapid-setting version, System G1 for a lower slip-resistance.

Properties

  • slip-resistant in R11
  • slip-resistant in R12/R13
  • glossy
  • resistant to industrial trucks
  • application area – Indoor
  • structured
  • rigid
  • resistant to mechanical load
  • impervious to fluids

Build-up of system – single products used

Each of our coating systems is a combination of perfectly matched products.

KLB-SYSTEM EPOXID EP 57

Low-emission, all-purpose 2-component epoxy resin for base and scratch coats or as levelling mortar for renovations or new floors. Combined with EP 202, it is tested according to&#...

KLB-Mischsand 2/1

Standard filling sand mixture for scratch coats and as an additive to unfilled coating systems based on epoxy or acrylic resins, such as for EP 99, AC 313, AC 320, AC 390.

KLB-SYSTEM POLYURETHAN PU 421

Solvent-free, coloured, self-levelling 2-component polyurethane coating with lower viscosity for smooth floors, scattered coverings or scratch coats. Suitable on substrates suscept...

KLB-SYSTEM KLB-Quarzsand 0.3/0.8 mm

Fire-dried, graded quartz sand in graduated grain sizes to be used as filling material for reactive resin works and coatings.

Always at your service with professional advice

If you still have questions about our products or systems – please contact us. We will get in touch with you immediately.

Phone

Our competent KLB team will be happy to provide you with quick and straightforward personal advice on our coating systems.

General enquiries
+49 8223 96 92 0

Order hotline
+49 8223 96 92 222

Hotline for technical enquiries
+49 8223 96 92 333

Sales service
+49 8223 96 92 777

Hotline to our export department
+49 8223 96 92 239











    *Recommended
    Sample tenders for our coating systems.

    Making work a little easier: Ausschreiben.de provides you with a large number of prepared tender documents for every project type and requirement.

    Get to Ausschreiben.de
    Bildschirm-Screenshot des Produktfinders auf der Homepage vor blauem Hintergrund

    IMPORTANT NOTICE FOR USERS OF THE INTERNET EXPLORER
    The website is not optimised for use in your browser. This results in display errors and limited functionality. We recommend that you use one of the following free browsers for unrestricted use of our website.