Modern dentist's office

Elastic, deformable and low-emission floor covering with pleasant walking comfort for light mechanical stress.

Assignment and requirements

In addition to a good cleanability and protection against yellowing on exposure to sunlight, a low-emission certification is equally important when chosing a suitable floor for doctor’s offices. A permanently clean and bright look of the flooring contributes to a modern and hygienic overall picture. Even with frequent cleaning cycles or aggressive detergents, the floor must not lose its appearance and technical properties.

Particularities and challenges

A continuous, visually high-attractive floor look and feel should run through all rooms of the dental practice and thus seamlessly connect all areas, from the waiting over to the treatment rooms. Above all, the hygiene of the design floor, its low tendency to become soiled and protection against staining play a decisive role in the daily routine of the doctor’s office. When using a light-stable and coloured top sealer, the floor covering can remain brilliantly white, even in areas exposed to sunlight, and does not change its colour.

The solution

In this area of application, System G3 KLB INDUSTRIAL LOW-VOC PU Comfort Sealed offers the possibility of combining elasticity and resistance to light mechanical stress in one system. The coordinated combination of different products creates a visually appealing and modern appearance in a fresh colour tone. Due to its elastic force, the coating provides a pleasant walkability to employees and, thanks to the easy-to-clean top sealer, it stays clean and hygienic, even with high patient traffic.

The low-VOC floor covering is certified according to “Indoor Air Comfort Gold” which makes it predestined for recreation rooms. The system products used are approved for sustainable building according to DGNB, LEED and Minergie ECO and thus create a low-emission, healthy indoor climate.

The Project

Category: Doctor’s office
Area size: 160 m²
Area type: Practice area and hallways
Completion: May 2020

Belagsaufbau des Systems G3 mit Nummerierung

Build-up of system

  1. Matt sealer KLB-SYSTEM POLYURETHAN PU 806 E 
  2. Top coat KLB-SYSTEM POLYURETHAN PU 425 Comfort
  3. Scratch coat with KLB-SYSTEM EPOXID EP 57 and mixed sand KLB-Mischsand 2/1, openly scattered with quartz sand KLB-Quarzsand 0.3/0.8 mm
  4. Primer KLB-SYSTEM EPOXID EP 57

Let our floors inspire you

Have a go at designing your ideal floor! Or get to know the differences and strengths of our various floor systems

A customised floor system for your project.

Configure your individual floor system so it is tailored to your project’s specific demands. If there should be several options available, you can compare the systems in more detail.

Get to the System Finder
Try out and find your favourite design.

KLB floor systems do not only offer a wide variety and choice of functional solutions. Also when it comes to visual appearance, there are hardly any limits set to your creativity and individuality. Just get in and try it out. Have fun!

Get to the Floor Designer
Bildschirm-Screenshot des Produktfinders auf der Homepage vor blauem Hintergrund

More references

Behandlungsraum einer Praxis mit roter Sportausstattung auf grauem Boden
Comfortable flooring in an orthopaedic surgery

For the floor in a sports orthopaedic surgery, an elastic coating was needed that would offer both staff and patients increased walking comfort. Due to the indoor use, it was also ...

  • Offices and public facilities
  • Healthcare
Operationstisch mit medizinischen Gerätschaften auf einem blau beschichteten, sauberen Boden
Operating room

Very sensitive technical measuring instruments are used during an operation, which need to be protected from static electrical charge. The floor also must be easy to clean and meet...

  • Healthcare
  • Special solutions
Eingearbeitetes Logo im Fußboden eines Tattoostudios mit einem Motorrad und weiteren dekorativen Elementen einer taubenblauen Wand mit Ziegelsteinen
Tattoo studio Heaven of Colours

It was the customer's request to develop a design concept to be consistent throughout the entire tattoo studio. Thus, the requirements were clearly specified: a high-quality and de...

  • Offices and public facilities
  • Healthcare
  • Special solutions

IMPORTANT NOTICE FOR USERS OF THE INTERNET EXPLORER
The website is not optimised for use in your browser. This results in display errors and limited functionality. We recommend that you use one of the following free browsers for unrestricted use of our website.