Statically crack-bridging EP 5590 (0.6 mm at -10 °C)

As OS 8 system on adjacent floor slabs, heavily frequented ramps or driveways in underground garages.

Reliable surface protection with our new product EP 5590:

System K7 KLB PARKING EP OS 8 Flex is a tested, robust and water vapour-permeable OS 8 coating system, which fulfils the requirements of the TR maintenance directive. With its special static crack-bridging capability of 0.6 mm (at -10 °C), the elastic intermediate layer KLB-SYSTEM EPOXID EP 5590 enables use on surfaces that are exposed to high mechanical loads, e.g. car parks.

KLB-SYSTEM EPOXID EP 5590 is the “centrepiece” of the system and a flexibilised, diffusible 2-component epoxy resin coating. When scattered with quartz sand KLB-Quarzsand 0.3/0.8 mm within the system, it acts as important wear layer together with the primer EP 5520 and the top sealer EP 5570.

EP 5590 – that’s convincing!

  • flexibilised
  • static crack-bridging
  • water vapour-permeable
  • Total Solid according to GISCODE (Test method “Deutsche Bauchemie”)
  • free of deleterious substances against varnish
  • for interior use

EP 5590 has the following advantages when used as system:

 

Flexibility in perfection

The flexibilised 2-component epoxy resin EP 5590 ensures the longevity of your surface protection coating on areas with high mechanical stress.

 

Static crack-bridging of class A3

EP 5590 is statically crack-bridging (at -10 °C) 0,6 mm and protects the building structure effectively against penetrating chemical substances, etc. even under intensive load.

 

Water vapour permeability of Class II

With its water vapour-diffusible properties, EP 5590 can be used on floor slabs in contact with the ground or concrete substrates with increased moisture, both indoors and outdoors.

 

Tested quality

As part of K7, it has been tested as surface protection system; thus EP 5590 helps to fulfil the special requirements of OS 8.

Tested within the system K7 KLB PARKING EP OS 8 Flex:

System build-up:

  1. Top sealer KLB-SYSTEM EPOXID EP 5570
  2. Wearing layer with KLB-SYSTEM EPOXID EP 5590, fully scattered with quartz sand KLB-Quarzsand 0.3/0.8 mm
  3. Primer KLB-SYSTEM EPOXID EP 5520, openly scattered with quartz sand KLB-Quarzsand 0.3/0.8 mm

With System K7 KLB PARKING EP OS 8 Flex, you benefit from a proven and robust surface protection that meets all requirements that are posed by the TR maintenance directive. The OS 8 system contains a flexibilised epoxy-based intermediate layer. Typical areas of application for the static crack-bridging OS 8 Flex system are slopes, ascents and descents or adjacent floor slabs. System K7 prevents the formation of cracks in the substrate and the penetration of water or chemicals, thus ensuring a high level of safety for the building structure. The system is water vapour-permeable and can be used on floor slabs in contact with the ground or on concrete substrates with increased moisture, both in interior and exterior areas.

Rely on our expertise and high-quality products to successfully complete your parking projects. Learn more about our surface protection systems for different areas of a car park in the following brochure:

To the parking brochure

Register now!

You are just a few clicks away from staying up to date with us.

Never miss out on new products or systems again and receive the latest references or important company information directly and at any time in your inbox.

KLB Newsletter Registrierung

More news in this category

PU 405 – new quality for better processing

PU 405 with its new quality has an optimised flow and working time that improves wet-on-wet processing at the same time, so that roller marks are no longer visible when designing l...

  • Innovation
Bodenabdichtung in einer Gewerbeküche
Sealing walls and floors with CW 510 and CW 512

These new products are suitable for sealing floor surfaces in showers and sanitary facilities, as waterproofing on bathroom walls or for liquid-tight swimming pool surrounds and ha...

  • Innovation
Oberflächenschutzbeschichtung OS 8 Flex auf einer Einfahrt zu einer Tiefgarage
Flexibilised surface protection systems with static crack-bridging

Systems K6 and K7 are very robust, flexibilised surface protection systems tested based on OS 8 for mechanically highly loaded indoor surfaces. Due to their static crack-bridging c...

  • Innovation
KLB-SYSTEM POLYURETHAN PU 9039

With the newly developed product PU 9039, we now have a solution that combines the best of two products for outdoor areas and interior applications.

  • Innovation

IMPORTANT NOTICE FOR USERS OF THE INTERNET EXPLORER
The website is not optimised for use in your browser. This results in display errors and limited functionality. We recommend that you use one of the following free browsers for unrestricted use of our website.