System E1
KLB INDUSTRIAL DIFFUSION LOW-VOC EP Color

Low-emission, vapour-permeable and economic epoxy resin top sealer

Build-up of system

  1. Second sealing layer with KLB-SYSTEM EPOXID EP 740 E
  2. Top sealer KLB-SYSTEM EPOXID EP 740 E
  3. Primer KLB-SYSTEM EPOXID EP 727 E

System description

The coloured sealing system E1 enables an economical installation of coatings in commercial or industrial areas with lower mechanical stress, and produces a smooth or slightly non-slip, silk matt surface. The system is used as sealer to be directly applied on concrete, cement, magnesia, anhydrite and mastic asphalt screeds – not only on floors, but also on walls and ceilings.

The main areas of application are commercial and industrial sectors exposed to lower stresses, cellars, technical or storage rooms. It can also be equipped with slip-resistance properties. From a technical point of view, it is suitable for surfaces that require to be water vapour-permeable, which is the case when magnesia or calcium sulphate screeds need to be reworked. Or generally, for all “waterproof” substrates with rising damp or higher moisture. 

The system complies with the requirements posed by Indoor Air Comfort Gold Label version 6.0 (2017) which guarantees regular testing and confirmation of the system’s low emissions. The components of this build-up have been certified for sustainable building according to DGNB, LEED or Minergie ECO.

Alternative systems: System E2 as thick-layered, vapour-permeable coating, System E3 with a slip-resistant and structured surface.

Properties

  • smooth
  • slightly slip-resistant R9/R10
  • water vapour-permeable
  • application area – Outdoor
  • application area – Indoor
  • silk-matt
  • rigid

Build-up of system – single products used

Each of our coating systems is a combination of perfectly matched products.

KLB-SYSTEM EPOXID EP 727 E

Low-emission, quick-drying 2-component epoxy resin emulsion primer for mineral substrates for subsequent coating underneath wall coverings and sealers. AgBB-compliant for...

KLB-SYSTEM EPOXID EP 740 E

Low-emission, coloured, silk-matt 2-component epoxy resin emulsion sealer for lightly stressed industrial and commercial surfaces. Water-dilutable. Available from 10 kg i...

Always at your service with professional advice

If you still have questions about our products or systems – please contact us. We will get in touch with you immediately.

Phone

Our competent KLB team will be happy to provide you with quick and straightforward personal advice on our coating systems.

General enquiries
+49 8223 96 92 0

Order hotline
+49 8223 96 92 222

Hotline for technical enquiries
+49 8223 96 92 333

Sales service
+49 8223 96 92 777

Hotline to our export department
+49 8223 96 92 239











    *Recommended
    Sample tenders for our coating systems.

    Making work a little easier: Ausschreiben.de provides you with a large number of prepared tender documents for every project type and requirement.

    Get to Ausschreiben.de
    Bildschirm-Screenshot des Produktfinders auf der Homepage vor blauem Hintergrund

    IMPORTANT NOTICE FOR USERS OF THE INTERNET EXPLORER
    The website is not optimised for use in your browser. This results in display errors and limited functionality. We recommend that you use one of the following free browsers for unrestricted use of our website.