System F9
KLB CONDUCTIVE DIFFUSION LOW-VOC EP EX
Water vapour-permeable, low-emission, conductive epoxy resin coating
Build-up of system
- Top sealer KLB-SYSTEM EPOXID EP 790 EL+
- Top coat KLB-SYSTEM EPOXID EP 785 EL+
- Conductive layer KLB-SYSTEM EPOXID EP 799 Ableitgrund with copper strip KLB-Kupferband attached underneath
- Scratch coat with KLB-SYSTEM EPOXID EP 782 E Spachtelgrund
- Primer KLB-SYSTEM EPOXID EP 727 E
System description
The coating system F9 is particularly suitable for substrates with rising moisture from the rear or generally, increased damp, “waterproof” substrates. It can be used on all floors that, from a technical point of view, must not be coated with a vapour-proof covering, while still being electrically conductive.
Typical application areas for this diffusible smooth coating are, for example, when reworking magnesia or calcium sulphate screeds on industrial or commercial surfaces with medium mechanical load.
The system complies with the requirements posed by Indoor Air Comfort Gold Label Version 6.0 (2017) which guarantees regular testing and confirmation of the system’s low-emissions. The components of this build-up have been certified for sustainable building according to DGNB, LEED or Minergie ECO.
Alternative systems: System F1 for EX protection, System F2 for ESD requirements.
Properties
- smooth
- slightly slip-resistant R9/R10
- low-VOC (AgBB)
- conductive (EX/personal protection)
- water vapour-permeable
- silk-matt
- rigid
- resistant to mechanical load
Downloads
System information
Cleaning recommendation
Build-up of system – single products used
Each of our coating systems is a combination of perfectly matched products.
Low-emission, quick-drying 2-component epoxy resin emulsion primer, containing water and diffusible, for mineral substrates underneath floor or wall coatings and top seal...
2-component trowelling base coat on the basis of a water-emulsified epoxy resin. As system filler for vapour-permeable systems. Suitable for coatings that comply with Eurofins...
Low-emission, vapour-permeable 2-component epoxy resin emulsion self-levelling coating which is electrically conductive when used in combination with EP 799 Ableitgrund. ...
Low-emission, coloured, electrically conductive 2-component epoxy resin sealer. Results in a water vapour-permeable, matt surface. Suitable for floors that must be AgBB-compli...
Always at your service with professional advice
If you still have questions about our products or systems – please contact us. We will get in touch with you immediately.
Phone
Our competent KLB team will be happy to provide you with quick and straightforward personal advice on our coating systems.
General enquiries
+49 8223 96 92 0
Order hotline
+49 8223 96 92 222
Hotline for technical enquiries
+49 8223 96 92 333
Sales service
+49 8223 96 92 777
Hotline to our export department
+49 8223 96 92 239
Making work a little easier: Ausschreiben.de provides you with a large number of prepared tender documents for every project type and requirement.
