System C4
KLB LOW-VOC PHARMA EP Screed

Low-emission, smooth epoxy resin decorative mortar coating (Terrazzo)

Build-up of system

  1. Top sealer KLB-SYSTEM POLYURETHAN PU 811 E
  2. Pore-filler KLB-SYSTEM EPOXID EP 172
  3. Mortar coating with KLB-SYSTEM EPOXID EP 158 and a coloured sand mixture 
  4. Primer KLB-SYSTEM EPOXID EP 57openly scattered with quartz sand KLB-Quarzsand 0.7/1.2 mm

System description

Low-emission, smooth, multi-layered mortar coating on the basis of epoxy resin and coloured sand mixtures, smoothed manually or mechanically and with several subsequent sealing layers. Smooth, pore-free, decorative coating which is suitable for floors exposed to medium or higher mechanical loads, even with light industrial truck traffic.

Typical areas of application are, for example, the pharmaceutical sector with clean rooms, museums, exhibitions as well as several other commercially or industrially used areas that pose decorative requirements to the floor.

The system complies with the requirements posed by Indoor Air Comfort Gold. The components of this build-up have been certified for sustainable building according to DGNB, LEED or Minergie ECO.

Alternative systems: plain-coloured, low-emission coating System C1System A7 without any requirements on low emissions.

Properties

  • smooth
  • slightly slip-resistant R9/R10
  • low-VOC (AgBB)
  • matt
  • resistant to industrial trucks
  • rigid
  • resistant to mechanical load
  • impervious to fluids
  • suitable for clean rooms
  • resistant to hot water up to 65 °C / 149 °F

Build-up of system – single products used

Each of our coating systems is a combination of perfectly matched products.

KLB-SYSTEM EPOXID EP 57

Low-emission, all-purpose 2-component epoxy resin for base and scratch coats or as levelling mortar for renovations or new floors. Combined with EP 202, it is tested according to&#...

KLB-SYSTEM POLYURETHAN PU 811 E

Non-pigmented, low-emission and light-stable 2-component top sealer on the basis of a high-quality polyurethane dispersion system, with good processability. The sealer can be appli...

KLB-SYSTEM EPOXID EP 158

Innovative, low-emission 2-component epoxy resin for mortar coatings that can be laid manually or by machine and mixed with natural or decorative sand. Very little yellowing! ...

KLB-SYSTEM EPOXID EP 172

Solvent-free and low-emission 2-component epoxy resin binding agent with low yellowing tendency for decorative pebble and mortar coatings - but also for sealing scattered indo...

Always at your service with professional advice

If you still have questions about our products or systems – please contact us. We will get in touch with you immediately.

Phone

Our competent KLB team will be happy to provide you with quick and straightforward personal advice on our coating systems.

General enquiries
+49 8223 96 92 0

Order hotline
+49 8223 96 92 222

Hotline for technical enquiries
+49 8223 96 92 333

Sales service
+49 8223 96 92 777

Hotline to our export department
+49 8223 96 92 239











    *Recommended
    Sample tenders for our coating systems.

    Making work a little easier: Ausschreiben.de provides you with a large number of prepared tender documents for every project type and requirement.

    Get to Ausschreiben.de
    Bildschirm-Screenshot des Produktfinders auf der Homepage vor blauem Hintergrund

    IMPORTANT NOTICE FOR USERS OF THE INTERNET EXPLORER
    The website is not optimised for use in your browser. This results in display errors and limited functionality. We recommend that you use one of the following free browsers for unrestricted use of our website.