Product Finder

The right product for every requirement and challenge

Primers

2-component epoxy resin primers
Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 50
KLB-SYSTEM EPOXID EP 50

Solvent-free, transparent, all-purpose 2-component epoxy resin for producing primers and scratch coats as well as mortar and levelling coats.

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 52 Spezialgrund
KLB-SYSTEM EPOXID EP 52 Spezialgrund

Solvent-free 2-component epoxy resin primer with very good wettability and adhesion properties as well as high moisture tolerance. Particularly suitable for damp substrates (f...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 55
KLB-SYSTEM EPOXID EP 55

Solvent-free, transparent 2-component epoxy resin for producing base layers and scratch coats. System primer approved for KLB water protection coatings EP 280 and EP 282 WHG.

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 71 Grundierung
KLB-SYSTEM EPOXID EP 71

Ready-to-use 2-component epoxy resin for priming and levelling normally absorbent concrete and screed substrates, prior to the application of coating systems.

2-component epoxy resin primers, rapid-setting
Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 51 Rapid S
KLB-SYSTEM EPOXID EP 51 RAPID S

Rapid setting, all-purpose 2-component epoxy resin for producing base layers, scratch coats and repair mortars. Ready for subsequent coatings in about 2 - 3 hours at 20 ...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 52 Rapid Beschichtung
KLB-SYSTEM EPOXID EP 52 RAPID

Solvent-free 2-component epoxy resin with high tolerance to moisture and particularly good wettability properties. Suitable for damp and problem substrates. Cures at temp...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 54 Rapid U
KLB-SYSTEM EPOXID EP 54 RAPID U

Rapid-setting 2-component epoxy resin for primers, scratch coats and repair mortar. Recoatable after 1.5 - 2.5 hours at 20 °C / 68 °F.

2-component epoxy resin primers, low-emission
Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 53 Spezialgrund
KLB-SYSTEM EPOXID EP 53 Spezialgrund-AgBB

Low-emission primer with higher moisture tolerance, AgBB-tested. Especially suitable for fresh substrates or substrates with an increased humidity or problematic and after the de-o...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 57
KLB-SYSTEM EPOXID EP 57

Low-emission, all-purpose 2-component epoxy resin for base and scratch coats or levelling layers for reconstruction or new floors. Tested in combination with low-emission primers a...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 58 Grundierung
KLB-SYSTEM EPOXID EP 58

High-quality 2-component epoxy resin for base coats which is free of benzyl alcohol. Extremely low-emission and suitable for recreation rooms according to AgBB.  Approved by t...

2-component epoxy resin primers, low-emission, water-based
Zweikomponentiges Gebinde KLB-SYSTEM EPOXID EP 724 E Haftgrund Super
KLB-SYSTEM EPOXID EP 724 E Haftgrund Super

Water-based, low-VOC, AgBB-compliant 2-component epoxy resin primer and binding agent for scratch coats with a very broad adhesion spectrum on various substrates (metal, ...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 727 E Grundierung
KLB-SYSTEM EPOXID EP 727 E

Solvent-free 2-K epoxy resin emulsion for primer. Rapid-setting and low-emission. Base coat for mineral substrates for steam permeable coatings with EP 785 HS in system with E...

1-component polyurethane primers
Kanister mit KLB-SYSTEM POLYURETHAN PU 61 RAPID Grundierung
KLB-SYSTEM POLYURETHAN PU 61 RAPID

Low-emission, ready-to-use 1-component polyurethane base coat to prime absorbent mineral substrates. To be used for glueing parquet flooring and as barrier layer on moist...

PMMA primers
KLB-Gebinde Komponente A und B
KLB-SYSTEM AC-Härterpulver

Reactive catalyst for curing PMMA resins such as AC 20, AC 313, AC 820, etc. To achieve excellent results, the additive quantities recommended for the resins must be observed.

Kanister mit Komponente A von KLB-SYSTEM ACRYL AC 20 Grundierung
KLB-SYSTEM ACRYL AC 20

Low-viscosity, rapid setting PMMA base coat for mineral substrates and subsequent PMMA coatings.  Please order hardener compound separately. 

KLB-Gebinde Komponente A und B
KLB-SYSTEM ACRYL AC Beschleuniger 10

Hardener accelerator for acrylic resins for temperatures below 0 °C / 32 °F. The accelerator must never be added above a temperature of 5 °C / 41 °F. Add the amount of material...

KLB-Gebinde Komponente A und B
KLB-SYSTEM ACRYL ADD 27

AC-ADD 27 is an additive for optimizing the adhesion of AC 20 on ceramic coverings and on metals. AC-ADD 27 is mixed into the AC 20 primer at 1% by weight before the hardener is ad...

Ready-mixed mortar, coving resins, renovation, injection and joint resins

Ready-mixed mortar
Sack und Kanister mit KLB-SYSTEM ACRYL AC 357 Acrylharz-Mörtel
KLB-SYSTEM ACRYL AC 357

Rapid setting 2-component acrylic resin mortar for concrete repair work and levelling layers on mineral substrates in layers of 3 to 20 mm. Easy-to-process, rapid-setting, res...

Sack und Kanister mit KLB-SYSTEM ACRYL AC 358 Acrylharz-Mörtel
KLB-SYSTEM ACRYL AC 358

Rapid-setting 2-component acrylic resin mortar for reconstruction works, reparation and reprofiling of mineral substrates in layers of 3 to 20mm. Easy to handle, rapid-setting. It ...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 85 Fein Mörtel
KLB-SYSTEM EPOXID EP 85 Fein

Solvent-free, stable 2-component epoxy resin mortar for concave and triangulare covings. Use also for repair work and as filler. Easy and smooth to handle for pore-free surfaces. G...

Coving resins
Kanister mit Komponente A von KLB-SYSTEM ACRYL AC 345 Hohlkehlenharz
KLB-SYSTEM ACRYL AC 345 Hohlkehlenharz

Paste-like, flexibilized polymethacrylic resin, which can be used for producing concave and triangular covings in combination with natural and coloured sands. Stable, rapid-setting...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 179 Mörtel
KLB-SYSTEM EPOXID EP 179

Thixotropic and transparent adjusted 2-component epoxyresin for the composition of stable mortar. To obtain sealed concave or triangular covings made of natural and coloured s...

Joint resins
Zweikomponentiges Gebinde mit KLB-SYSTEM ACRYL AC 395 Fugenharz
KLB-SYSTEM ACRYL AC 395

Grey 2-component joint resin for plasto-elastically deformable grouting of concrete joints. Ready to use, fast curing, grindable, incl. hardener powder!

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 465 Fugenmasse
KLB-SYSTEM POLYURETHAN PU 465

Paste-like, trowelable, elastic, solvent-free 2-component polyurethane joint compound which is particularly suitable for grouting construction and expansion joints with low mo...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 465 Fugenmasse
KLB-SYSTEM POLYURETHAN PU 465 LQ

Pourable, elastic, solvent-free 2-component polyurethane joint compound which is particularly suitable for grouting construction and expansion joints with low movement - prefe...

Renovation and injection resins
Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 1270
KLB-SYSTEM EPOXID EP 1270

Solvent-free, low-viscosity 2-component epoxy resin with good wettability. Excellent for grouting cracks by injection.

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 1276 Vergussharz
KLB-SYSTEM EPOXID EP 1276

Low-viscosity, yellowing-resistant and colourless 2-component epoxy grouting resin for producing decorative objects together with wood. 

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 5100 Plus
KLB-SYSTEM EPOXID EP 5100 Plus

Rapid-setting, all-purpose 2-component epoxy resin for repairs, assembly and bonding works prior to coating.

Zweikomponentiges Gebinde KLB-SYSTEM POLYURETHAN PU 1900 Sanierung von Rissen
KLB-SYSTEM POLYURETHAN PU 1900

Very reactive 2-component polyurethane special resin for the quick renovation of screed cracks, as a joint sealer, or for bonding structural elements.

Decor binding agent, top sealer, pore-filling

Decor binding agent
Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 175 Versiegelung
KLB-SYSTEM EPOXID EP 175

High-quality 2-component epoxy resin with low yellowing tendency for high-quality decorative pebble coatings as well as for sealing decorative mortar and scattered coverings.

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 177 Porenverschluss
KLB-SYSTEM EPOXID EP 177

Thixotropic and transparent 2-component epoxy resin for closing the pores of quartz and marble pebble coverings in interior areas. Suitable for grain sizes from 1 – 4 mm. To...

Hobbock mit KLB-SYSTEM POLYURETHAN PU 9010 Flex Beschichtung
KLB-SYSTEM POLYURETHAN PU 9010 Flex

Transparent, moisture-curing 1-component polyurethane coating, light-stable and chalk-resistant, containing solvents. Used as binding agent for top and self-levelling coatings...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 9030 Flex Bindemittel
KLB-SYSTEM POLYURETHAN PU 9030 Flex

Unpigmented 2-component polyurethane binding agent, light-stable and non-chalking for binding colour-stable quartz pebble coatings in interior or exterior areas. Sol...

Top sealers
Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 175 Spezial Versiegelung
KLB-SYSTEM EPOXID EP 175 Spezial

Solvent-free, transparent 2-component epoxy resin for top sealing decorative color quartz sand and scattered coatings. Only slightly yellowing.

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYUREA PU 475 Spezial Deck-Versiegelung
KLB-SYSTEM POLYUREA PU 475 Spezial

Light-resistant, solvent-free, rapid-setting 2-component polyurethane resin for transparent top sealing of coloured sand coatings. Suitable for scattered coatings in slip...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 484 Kopfversiegelung
KLB-SYSTEM POLYURETHAN PU 484

High-quality, colourless and light-resistant 2-component polyurethane resin for use as a top sealer on slip-resistant coloured sand scattered coatings and as a transparent resin la...

Pore-filling
Eimer mit KLB-SYSTEM DEKOR DS 900 Bindemittel
KLB-SYSTEM DEKOR DS 900

Thixotropic, transparently drying dispersion binding agent for quartz and marble pebble applications on vertical surfaces such as on steps or walls (up to 1 m high)....

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 177 Porenverschluss
KLB-SYSTEM EPOXID EP 177

Thixotropic and transparent 2-component epoxy resin for closing the pores of quartz and marble pebble coverings in interior areas. Suitable for grain sizes from 1 – 4 mm. To...

2-component epoxy resin mortars and ready-mixed mortar

Mortar resin
Eimerkombination mitKLB-SYSTE EPOXID EP 28 Bauharz
KLB-SYSTEM EPOXID EP 28 Bauharz

Economic 2-component epoxy primer and mortar resin for producing primers, scratch coats and levelling layers prior to coating.

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 150
KLB-SYSTEM EPOXID EP 150

All-purpose 2-component epoxy resin for manual and machine-applied synthetic resin and decorative sand coatings. Only slightly yellowing.

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 158
KLB-SYSTEM EPOXID EP 158

Innovative, low-emission 2-K epoxy resin for mortar coatings that can be laid by hand and mixed with natural and decorative sand. Very little yellowing! Suitable for coatings that ...

Ready-mixed mortar
Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 85 Fein Mörtel
KLB-SYSTEM EPOXID EP 85 Fein

Solvent-free, stable 2-component epoxy resin mortar for concave and triangulare covings. Use also for repair work and as filler. Easy and smooth to handle for pore-free surfaces. G...

Chemoresin®

Primers and coatings resistant to chemicals
Zweikomponentiges Gebinde mit KLB-SYSTEM CHEMORESIN CR 920 Bodenbeschichtung
CHEMORESIN CR 920

Innovative 2-component polyurethane coating for producing smooth or slip resistant, highly chemical-resistant coverings.

Coatings

2-component epoxy resin primers, low-emission
Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 202 Clean Beschichtung
KLB-SYSTEM EPOXID EP 202 Clean

Low-emission, coloured 2-component epoxy resin coating and top sealer for hard and smooth surfaces. EP 202 Clean is designed to offer preventive protection against b...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 202 Beschichtung und Kopfversiegelung
KLB-SYSTEM EPOXID EP 202

Low-emission, coloured 2-component epoxy resin coating for hard, and smooth surfaces or as top sealer for industrially used scattered coatings. Tested in combination with low-...

2-component epoxy resin mortars and ready-mixed mortar
Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 99 Beschichtungen
KLB-SYSTEM EPOXID EP 99

Unfilled, pre-formulated, coloured 2-component epoxy resin coating that produces smooth and scattered coatings when used in combination with mixed sand KLB-Mischsand 2/1 ...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 236
KLB-SYSTEM EPOXID EP 236

Solvent-free, pigmented 2-component epoxy resin structured coating for economical floors exposed to medium stress.  The surfaces have a glossy structure.

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 285 CR Verlaufsbeschichtung
KLB-SYSTEM EPOXID EP 285 CR

High quality, self-levelling 2-component epoxy resin coating withvery good resistance to chemicals. For smooth coatingsin layers of 2 – 3 mm. Also for scattered coatings.

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 290 Flex Beschichtungsmasse
KLB-SYSTEM EPOXID EP 290 Flex

Solvent-free, flexible, self-levelling 2-component epoxy resin coating. For flexible intermediate layers and also for hard-elastic grouting of joints with little movement. Preferab...

Water protection coating according to WHG
Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 55
KLB-SYSTEM EPOXID EP 55

Solvent-free, transparent 2-component epoxy resin for producing base layers and scratch coats. System primer approved for KLB water protection coatings EP 280 and EP 282 WHG.

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 280 Beschichtung
KLB-SYSTEM EPOXID EP 280 WHG

Electrically conductive, chemical resistant coating for collecting drains and rooms, as HBV (production, treatment or processing facilities) or LAU plants (storage, filling an...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 282 WHG Beschichtung
KLB-SYSTEM EPOXID EP 282 WHG

Chemical resistant coating for collecting drains and rooms, as HBV (production, treatment or processing facilities) or LAU plants (storage, filling and handling facilities) ac...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 799 Ableitgrund
KLB-SYSTEM EPOXID EP 799 Ableitgrund

Low-emission 2-component epoxy resin conductive layer based on an epoxy resin emulsion. System product for electrically dissipative floor coverings.  When used within the syst...

Vapour-permeable coatings and sealers
Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 805 E Mattversiegelung
KLB-SYSTEM POLYURETHAN PU 805 E

Low-emission, transparent and light-stable 2-component matt sealer on the basis of a high-quality polyurethane dispersion system, with good processability. The sealer can be applie...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 805 E - R10 Mattversiegelung
KLB-SYSTEM POLYURETHAN PU 805 E - R10

Low-emission, transparent and light-stable 2-component matt sealer on the basis of a high-quality polyurethane dispersion system, with good processability. The sealer can be a...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 806 E Mattversiegelung
KLB-SYSTEM POLYURETHAN PU 806 E

Low-emission, coloured and light-stable 2-component matt sealer on the basis of a high-quality polyurethane dispersion system, with good processability. The sealer can be applied a...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 806 E - R10 Mattversiegelung
KLB-SYSTEM POLYURETHAN PU 806 E - R10

Low-emission, coloured and light-stable 2-component matt sealer on the basis of a high-quality polyurethane dispersion system, adjusted with a slip-resistance grade of R1...

Car park coatings (including rapid-setting)
CAR PARK surface protection system KLB-SYSTEM POLYURETHAN PU 5550

Elastic 2-component polyurethane coating which can be used as floating/wearing layer for crack-bridging surface protection systems OS 11 a/b according to DAfStb directive.

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 216 Rapid Beschichtung
KLB-SYSTEM EPOXID EP 216 RAPID

Rapid-setting, solvent-free 2-component epoxy resin coating for smooth surfaces or as base layer and top sealer for scattered coatings. Tested as surface protection system OS ...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 216 Beschichtung
KLB-SYSTEM EPOXID EP 216 Universal

Universal, self-levelling and solvent-free 2-component epoxy resin coating for smooth surfaces or as base layer and top sealer for scattered coatings. Tested as surface protection ...

3-Komponenten-Gebinde mit KLB-SYSTEM POLYURETHAN PU 5000 RX Versiegelung
KLB-SYSTEM POLYURETHAN PU 5000 RX

Solvent-free, colour-stable 2-component polyurethane sealing resin to be used in combination with RX scattering component for rapid-setting, slip-resistant floor coatings. Particul...

2-component polyurethane coatings, comfortable
Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 426 risseüberbrückende Abdichtung und Beschichtung
KLB-SYSTEM POLYURETHAN PU 426

Low-emission, flexible 2-component polyurethane system for crack-bridging composite sealing and as top coat for areas with light load. With general building authority test cer...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 427 Bindemittel
KLB-SYSTEM POLYURETHAN PU 427

Solvent-free, natural-coloured polyurethane binding agent for flexible mortar and levelling coatings on surfaces susceptible to deformation. Not resistant to yellowing!

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 430 Silent
KLB-SYSTEM POLYURETHAN PU 430 Silent

Low-emission, self-levelling, impact sound reducing 2-component polyurethane elastic layer for producing comfort floors. The flexible interlayer is applied in thicknesses from 3 mm...

3-Komponenten-Gebinde mit KLB-SYSTEM POLYURETHAN PU 5000 RX Versiegelung
KLB-SYSTEM POLYURETHAN PU 5000 RX

Solvent-free, colour-stable 2-component polyurethane sealing resin to be used in combination with RX scattering component for rapid-setting, slip-resistant floor coatings. Particul...

PMMA coatings and top sealer
Kanister mit der Kompontente A des 2-K-Acrylharzes AC 390
KLB-SYSTEM ACRYL AC 390

Rapid-setting 2-component acrylic coating resin for producing self-levelling, flexible interlayer or as composite seal, e.g. on scattered PMMA kitchen coatings. As deform...

Kanister mit Komponente A von KLB-SYSTEM ACRYL AC 820 Versiegelungsharz
KLB-SYSTEM ACRYL AC 820

Rapid setting, low-viscosity 2-component PMMA resin with low tendency to yellowing. The resin can be used for sealing smooth floors, partiColor®-Chips (flakes) scattered...

Kanister mit Komponente A von KLB-SYSTEM ACRYL AC 826 Versiegelungsharz
KLB-SYSTEM ACRYL AC 826

Rapid-setting, low-viscosity 2-component PMMA resin with low tendency for yellowing. The resin can be used for sealing scattered slip-resistant coatings in wet areas. Especial...

KLB-Gebinde Komponente A und B
KLB-SYSTEM ACRYL ADD 27

AC-ADD 27 is an additive for optimizing the adhesion of AC 20 on ceramic coverings and on metals. AC-ADD 27 is mixed into the AC 20 primer at 1% by weight before the hardener is ad...

Conductive coatings (personal and explosion protection)
Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 785 EL+ Verlaufsbeschichtung
KLB-SYSTEM EPOXID EP 785 EL+

Low-emission, vapour-permeable 2-component epoxy resin emulsion self-levelling coating - combined with EP 799, an electrical conductivity can be reached. Suitable for commerci...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 790 EL+ ableitfähige Versiegelung
KLB-SYSTEM EPOXID EP 790 EL+

Low-emission, coloured, electrically conductive 2-component epoxy resin sealer. Resulsts in a water vapour-permeable, matt surface. AgBB-compliant for recreation rooms - certi...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 799 Ableitgrund
KLB-SYSTEM EPOXID EP 799 Ableitgrund

Low-emission 2-component epoxy resin conductive layer based on an epoxy resin emulsion. System product for electrically dissipative floor coverings.  When used within the syst...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 413 EL+ ableitfähige Beschichtung
KLB-SYSTEM POLYURETHAN PU 413 EL+

Low-emission, electrically conductive, flexible 2-component polyurethane coating which is suitable for use on substrates susceptible to deformation, like mastic asphalt, layin...

Conductive coatings for ESD protection
Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 77 Spachtel-Leitschicht
KLB-SYSTEM EPOXID EP 77 Spachtel-Leitschicht

Low-emission and electrically conductive 2-component epoxy resin filler coat - to be applied in one single layer - before ESD-conductive coatings are installed. As base c...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 211 ESD Fußbodenbeschichtung
KLB-SYSTEM EPOXID EP 211 ESD

Ready-to-use, solvent-free and electrically conductive 2-component epoxy resin floor coating for increased demands in ESD areas as well as for personal and explosion protection. Su...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 212 ESD Fußbodenbeschichtung
KLB-SYSTEM EPOXID EP 212 ESD

High-quality, solvent-free and electrically conductive 2-component epoxy resin floor coating for increased demands in ESD areas. Suitable for ESD requirements according to DIN EN 6...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 236 ESD Strukturbelag
KLB-SYSTEM EPOXID EP 236 ESD

Low-emission, electrically conductive 2-component epoxy resin textured coating for thin layer coatings. Meets the requirements for explosion and ESD protection. Particula...

Hygienic coatings and sealers (Clean)
Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 806 E Clean Mattversiegelung
KLB-SYSTEM POLYURETHAN PU 806 E Clean

Low-emission, coloured and light-stable 2-component matt sealer on the basis of a high-quality polyurethane dispersion system with easy processability. The sealer can be ...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 806 E Clean - R10 Mattversiegelung
KLB-SYSTEM POLYURETHAN PU 806 E Clean - R10

Low-emission, coloured and light-stable 2-component matt sealer on the basis of a high-quality polyurethane dispersion system, adjusted with a slip-resistance grade of R1...

2-K Gebinde mit KLB-SYSTEM POLYURETHAN PU 806 E Clean - Wall Mattversiegelung
KLB-SYSTEM POLYURETHAN PU 806 E Clean - Wall

Low-emission, coloured and light-stable 2-component matt sealer on the basis of a high-quality polyurethane dispersion system. The sealing is designed to offer preventive prot...

Dreikomponentiges Gebinde KLB-SYSTEM PU-BETON PU 4080 Clean
KLB-SYSTEM PU-BETON 4080 Clean Kopfsiegel

Trowelable 3-component PU-BETON top sealer for a final coating of surfaces scattered with quartz sand or corundum. Additionally, the sealer is designed to offer preventiv...

ECC and levelling coatings, primers
Sack mit KLB-SYSTEM EPOXID EC 633 C Ausgleichsmörtel
KLB-SYSTEM EC 633 C

Self-levelling, cement-based, polymer-modified levelling mortar for layer thicknesses of 3 - 10 mm. The application is intended for commercial and industrial coverings subject...

Dreikomponentiges Gebinde mit KLB-SYSTEM EPOXID EC 610 C Epoxid-Zement-Ausgleichsschicht
KLB-SYSTEM EPOXID EC 610 C

Fast-setting, self-levelling 3-component epoxy cement mortar used as a levelling and osmoprotection intermediate layer. It is suitable for levelling and equalising rough or uneven ...

Compound seals
Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 290 Flex Beschichtungsmasse
KLB-SYSTEM EPOXID EP 290 Flex

Solvent-free, flexible, self-levelling 2-component epoxy resin coating. For flexible intermediate layers and also for hard-elastic grouting of joints with little movement. Preferab...

Wall coatings and sealers
Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 806 E Mattversiegelung
KLB-SYSTEM POLYURETHAN PU 806 E

Low-emission, coloured and light-stable 2-component matt sealer on the basis of a high-quality polyurethane dispersion system, with good processability. The sealer can be applied a...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 806 E - Wall Mattversiegelung
KLB-SYSTEM POLYURETHAN PU 806 E - Wall

Low-emission, coloured and light-stable 2-component matt sealer on the basis of a high-quality polyurethane dispersion system. The increased opacity can specifically be a...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 806 E Clean Mattversiegelung
KLB-SYSTEM POLYURETHAN PU 806 E Clean

Low-emission, coloured and light-stable 2-component matt sealer on the basis of a high-quality polyurethane dispersion system with easy processability. The sealer can be ...

2-K Gebinde mit KLB-SYSTEM POLYURETHAN PU 806 E Clean - Wall Mattversiegelung
KLB-SYSTEM POLYURETHAN PU 806 E Clean - Wall

Low-emission, coloured and light-stable 2-component matt sealer on the basis of a high-quality polyurethane dispersion system. The sealing is designed to offer preventive prot...

PU concrete coatings, primers, top seal
Dreikomponentiges Gebinde KLB-SYSTEM PU-BETON PU 4012
KLB-SYSTEM PU-BETON 4012 Standfest

Stable 3-component PU-BETON mortar for concave and triangular covings in combination with polyurethane concrete coatings. For wet areas with exposure to hot water and chemical...

Dreikomponentiges Gebinde KLB-SYSTEM PU-BETON PU 4045
KLB-SYSTEM PU-BETON 4045

High-quality 3-component PU-BETON levelling mortar for rough, milled or blasted substrates. Applicable in a layer thickness of minimum 2 to 10 mm. For the shrinkage-free ...

Dreikomponentiges Gebinde KLB-SYSTEM PU-BETON PU 4050
KLB-SYSTEM PU-BETON 4050 Grundierung

Trowelable 3-component PU-BETON base coat used within the system as primer for PU-BETON 4006, 4009, 4011 Grip and 4012 Standfest. 

Dreikomponentiges Gebinde KLB-SYSTEM PU-BETON PU 4080
KLB-SYSTEM PU-BETON 4080 Kopfsiegel

Trowelable 3-component PU-BETON top sealer for a final coating of scattered and slip-resistant surfaces.  Available in the colours beige, grey, green and red.

Top sealers for scattered coatings

PMMA top sealers
KLB-Gebinde Komponente A und B
KLB-SYSTEM AC-Härterpulver

Reactive catalyst for curing PMMA resins such as AC 20, AC 313, AC 820, etc. To achieve excellent results, the additive quantities recommended for the resins must be observed.

Kanister mit Komponente A von KLB-SYSTEM ACRYL AC 820 Versiegelungsharz
KLB-SYSTEM ACRYL AC 820

Rapid setting, low-viscosity 2-component PMMA resin with low tendency to yellowing. The resin can be used for sealing smooth floors, partiColor®-Chips (flakes) scattered...

Kanister mit Komponente A von KLB-SYSTEM ACRYL AC 826 Versiegelungsharz
KLB-SYSTEM ACRYL AC 826

Rapid-setting, low-viscosity 2-component PMMA resin with low tendency for yellowing. The resin can be used for sealing scattered slip-resistant coatings in wet areas. Especial...

PU concrete top sealers
Dreikomponentiges Gebinde KLB-SYSTEM PU-BETON PU 4080 Clean
KLB-SYSTEM PU-BETON 4080 Clean Kopfsiegel

Trowelable 3-component PU-BETON top sealer for a final coating of surfaces scattered with quartz sand or corundum. Additionally, the sealer is designed to offer preventiv...

Dreikomponentiges Gebinde KLB-SYSTEM PU-BETON PU 4080
KLB-SYSTEM PU-BETON 4080 Kopfsiegel

Trowelable 3-component PU-BETON top sealer for a final coating of scattered and slip-resistant surfaces.  Available in the colours beige, grey, green and red.

2-component epoxy resin top seal
Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 175 Spezial Versiegelung
KLB-SYSTEM EPOXID EP 175 Spezial

Solvent-free, transparent 2-component epoxy resin for top sealing decorative color quartz sand and scattered coatings. Only slightly yellowing.

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 216 Beschichtung
KLB-SYSTEM EPOXID EP 216 Universal

Universal, self-levelling and solvent-free 2-component epoxy resin coating for smooth surfaces or as base layer and top sealer for scattered coatings. Tested as surface protection ...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 296 Deck-Versiegelung
KLB-SYSTEM EPOXID EP 296 Kopfsiegel

Solvent-free, high-quality, coloured 2-component epoxy resin sealer for top sealing of sanded and slip-resistant scattered coatings.

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 296 Rapid Deck-Versiegelung
KLB-SYSTEM EPOXID EP 296 RAPID

Solvent-free, rapid-setting, pigmented 2-component epoxy resin sealer for top sealing of sanded, slip-resistant scattered coatings. Accessible after 5 - 6 hours at 20 °C...

2-component polyurea top sealers
CAR PARK surface protection system KLB-SYSTEM POLYUREA PU 5580

Solvent-free, pigmented and flexibilised 2-component polyurethane resin top sealer for surface protection systems OS 11a/b in accordance with the DAfStB directive for indoor a...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYUREA PU 475 Spezial Deck-Versiegelung
KLB-SYSTEM POLYUREA PU 475 Spezial

Light-resistant, solvent-free, rapid-setting 2-component polyurethane resin for transparent top sealing of coloured sand coatings. Suitable for scattered coatings in slip...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 484 Kopfversiegelung
KLB-SYSTEM POLYURETHAN PU 484

High-quality, colourless and light-resistant 2-component polyurethane resin for use as a top sealer on slip-resistant coloured sand scattered coatings and as a transparent resin la...

Sealers, impregnations

2-component epoxy resin sealers, water-emulsified and vapour-permeable
Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 742 E Versiegelung
KLB-SYSTEM EPOXID EP 742 E

Low-emission, pigmented and silk-matt 2-component epoxy resin emulsion sealer for lightly stressed commercial and industrial surfaces. Water-thinnable. Available in many colou...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 750 E Versiegelung
KLB-SYSTEM EPOXID EP 750 E

Low-emission, pigmented and glossy 2-component epoxy resin emulsion sealer for lightly stressed industrial and commercial surfaces. Water-thinnable. Available from 1...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 752 E Versiegelung
KLB-SYSTEM EPOXID EP 752 E

Low-emission, pigmented and glossy 2-component epoxy resin emulsion sealer for lightly stressed commercial and industrial surfaces. Water-thinnable. Available in many colours ...

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 790 EL+ ableitfähige Versiegelung
KLB-SYSTEM EPOXID EP 790 EL+

Low-emission, coloured, electrically conductive 2-component epoxy resin sealer. Resulsts in a water vapour-permeable, matt surface. AgBB-compliant for recreation rooms - certi...

PMMA sealers
Kanister mit Komponente A von KLB-SYSTEM ACRYL AC 820 Versiegelungsharz
KLB-SYSTEM ACRYL AC 820

Rapid setting, low-viscosity 2-component PMMA resin with low tendency to yellowing. The resin can be used for sealing smooth floors, partiColor®-Chips (flakes) scattered...

Kanister mit Komponente A von KLB-SYSTEM ACRYL AC 826 Versiegelungsharz
KLB-SYSTEM ACRYL AC 826

Rapid-setting, low-viscosity 2-component PMMA resin with low tendency for yellowing. The resin can be used for sealing scattered slip-resistant coatings in wet areas. Especial...

PU concrete
Dreikomponentiges Gebinde KLB-SYSTEM PU-BETON PU 4080
KLB-SYSTEM PU-BETON 4080 Kopfsiegel

Trowelable 3-component PU-BETON top sealer for a final coating of scattered and slip-resistant surfaces.  Available in the colours beige, grey, green and red.

2-component epoxy resin sealers, containing solvents
Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 861 matte Versiegelung
KLB-SYSTEM EPOXID EP 861

Solvent-based 2-component epoxy resin sealer. Jelly consistency. For matt sealing industrial areas with higher loads. Very good chemical resistance.

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 860 Versiegelung
KLB-SYSTEM EPOXID EP 860

Solvent-based 2-component epoxy resin sealer. Jelly consistency. For matt sealing industrial areas with higher loads. Very good chemical resistance.

Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 860 Clean matte Versiegelung
KLB-SYSTEM EPOXID EP 860 Clean

Solvent-based, transparent 2-component epoxy resin sealer for matting industrial and terrazzo floors in areas exposed to increased stress. Excellent chemical resistance. EP 86...

2-component polyurethane sealers, water-emulsified
Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 806 E Clean Mattversiegelung
KLB-SYSTEM POLYURETHAN PU 806 E Clean

Low-emission, coloured and light-stable 2-component matt sealer on the basis of a high-quality polyurethane dispersion system with easy processability. The sealer can be ...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 806 E Clean - R10 Mattversiegelung
KLB-SYSTEM POLYURETHAN PU 806 E Clean - R10

Low-emission, coloured and light-stable 2-component matt sealer on the basis of a high-quality polyurethane dispersion system, adjusted with a slip-resistance grade of R1...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 811 E Versiegelung
KLB-SYSTEM POLYURETHAN PU 811 E

Colourless, low-emission 2-component top sealer that is stable against light and based on a high-quality polyurethane dispersion system; easy to handle. The top sealer can be appli...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 812 E Versiegelung
KLB-SYSTEM POLYURETHAN PU 812 E

Pigmented, low-emission and light-stable 2-component sealer on the basis of a high-quality polyurethane dispersion system, with good processability. The sealer can be applied as co...

2-component polyurethane sealers, containing solvents
Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 881 farbige Mattversiegelung
KLB-SYSTEM POLYURETHAN PU 881

Coloured 2-component matt sealer on the basis of polyurethane resin with good mechanical resistance as well as an excellent light and weather stability, containing s...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 881 EL+ ableitfähige, matte Absiegelung
KLB-SYSTEM POLYURETHAN PU 881 EL+

Solvent-based, electrically conductive 2-component polyurethane sealer for matt top sealing of dissipative polyurethane and epoxy resin coatings. When used in combination...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 882 Farblose, glänzende Versiegelung
KLB-SYSTEM POLYURETHAN PU 882

Transparent, silky gloss 2-component sealer on the basis of polyurethane resin, with an excellent light and weather stability. Good crosslinking and wear-resistant. Finely structur...

Zweikomponentiges Gebinde mit KLB-SYSTEM POLYURETHAN PU 883 farbige, glänzende Versiegelung
KLB-SYSTEM POLYURETHAN PU 883

Coloured, silky gloss 2-component sealer on the basis of polyurethane resin, with an excellent light and weather stability. Good cross-linking and wear resistance. Thixotropic, res...

1-component polyurethane sealers
Hobbock mit KLB-SYSTEM POLYURETHAN PU 9010 Flex Beschichtung
KLB-SYSTEM POLYURETHAN PU 9010 Flex

Transparent, moisture-curing 1-component polyurethane coating, light-stable and chalk-resistant, containing solvents. Used as binding agent for top and self-levelling coatings...

Hobbock mit KLB-SYSTEM POLYURETHAN PU 9018 Flex Color Beschichtung
KLB-SYSTEM POLYURETHAN PU 9018 Flex Color

Pigmented, moisture-curing 1-component polyurethane coating. Light-stable and weather-resistant balcony coating for smooth and scattered coverings, containing solvents.

Impregnations
Zweikomponentiges Gebinde mit KLB-SYSTEM EPOXID EP 722 E Emulsion
KLB-SYSTEM EPOXID EP 722 E

Transparent 2-component epoxy resin emulsion for the impregnation of mineral substrates as concrete, cement screed and hard coverings. Water dilutable concentrate.

Kanister mit KLB-SYSTEM BI 960 Imprägnierung
KLB-SYSTEM IMPRÄGNIERUNG BI 960

One-component, ready-to-use, aqueous impregnation for cement-bound surfaces like concrete. Primarily used for smooth, high-quality and hard-grain industrial concrete slabs...

Hobbock mit KLB-SYSTEM POLYURETHAN PU 8350 Bindemittel
KLB-SYSTEM POLYURETHAN PU 8350

KLB-SYSTEM POLYURETHAN PU 8350 is a solvent-based, deeply penetrating 1-component polyurethane binder. It is suitable for impregnation and surface solidification of concrete and ce...

Fillers, quartz sand, scattering material, suspending agents

Sand mixtures
KLB-Mischsand 2/1

Standard filling sand mixture for scratch coats and as an additive to unfilled coating systems based on epoxy or acrylic resins, such as for EP 99, EP 100 VS, AC 313, AC 320, AC 39...

Suspending agents and structured granulate
KLB-Gebinde Komponente A und B
KLB-STELLMITTEL 5 FT

Fibrous, white suspending agent with good and dust-free incorporation properties. Well suited for mortar mixtures. Suitable for PU 405 / PU 410.

KLB-Gebinde Komponente A und B
KLB-STRUKTURGRANULAT RQX 9

High-quality structuring agent to be blown into self-levelling coatings for increasing the slip resistance to grade R9 in accordance with BGR 181. Also suitable for condu...

KLB-Gebinde Komponente A und B
KLB-STRUKTURGRANULAT RQX 10

High-quality structuring agent to be blown into self-levelling coatings for increasing the slip resistance to grade R10 in accordance with BGR 181. With conductive coatin...

KLB-Gebinde Komponente A und B
KLB-SYSTEM STELLMITTEL 3 Super

Powdery, white suspending agent for thickening coating compounds on vertical surfaces, concave skirting, etc.

Thinner, care and cleaning agents

Thinner
Kanister mit Lösungsmittelgemisch: Verdünner und Reiniger VR 24 für Epoxidharze
KLB-SYSTEM VERDÜNNER UND REINIGER VR 24

Thinner and cleanser for epoxy resins. Highly flammable. Not suitable for polyurethane resins!

Kanister mit Lösungsmittelgemisch: Verdünner und Reiniger VR 28 für Polyurethan- und Acrylharze
KLB-SYSTEM VERDÜNNER UND REINIGER VR 28

Thinner and cleanser for polyurethane resins. Can also be used as cleanser for epoxy resins. Flammable.

Kanister mit Lösungsmittelgemisch: Reiniger VR 33 für Reaktionsharze
KLB-SYSTEM VERDÜNNER UND REINIGER VR 33

Powerful cleanser for tools and machinery. Not recommended as thinner! Highly flammable.

Kanister mit Lösungsmittelgemisch: Verdünner und Reiniger VR 119 für Acrylharze
KLB-SYSTEM VERDÜNNER UND REINIGER VR 119

Solvent mixture for cleaning tools and machines for acrylic resin work with strong dissolving effect even after slight hardening of the resins. Not recommended for thinning! Highly...

Cleaning agents
Kanister mit KLB-SYSTEM BODENPFLEGE PS 22 Ölentferner
KLB-SYSTEM INDUSTRIEBODENPFLEGE PS 22 Ölentferner

Cleansing concentrate for the removal of oil, grease and drilling emulsion residues prior to the application of coatings. Use in combination with EP 52 Spezialgrund.

Behälter mit KLB-SYSTEM BODENPFLEGE PS 25 Reinigungskonzentrat
KLB-SYSTEM INDUSTRIEBODENPFLEGE PS 25 Reinigungskonzentrat

Concentrated tenside mixture to clean industrial floors. Wide range of application. Does not corrode the flooring material.

Care agents
Behälter mit KLB-SYSTEM BODENPFLEGE PS 90 Pflegeversiegelung
KLB-SYSTEM INDUSTRIEBODENPFLEGE PS 90 Pflegeversiegelung, anti-static

High-quality, anti-static maintenance sealer for electrically conductive industrial floors. Especially suitable for KLB-SYSTEM EPOXID EP 785 EL+.

Kanister mit KLB-SYSTEM BODENPFLEGE PS 88 Pflegeversiegelung
KLB-SYSTEM Industriebodenpflege PS 88 Pflegeversiegelung

High-quality maintenance sealer for industrially and commercially used areas with increased load. Especially suitable for the diffusible coating KLB-SYSTEM EPOXID EP 785 HS as...

Reinforcement fleece and fabric, sealing ribbons, edges and sleeves

Reinforcement fleece
Armierungsflies mit Struktur
KLB-SYSTEM Armierungsvlies VA 1044

Glass fiber fleece with low weight per unit area, to be used in combination with KLB-SYSTEM POLYURETHAN PU 662

Weißes Armierungsvlies VA 1040 auf einer Rolle
KLB-SYSTEM ZUBEHÖR Armierungsgewebe VA 1040

Open-meshed reinforcement fabric used as crack-bridging inlay for reactive resin works on wall and floor coverings. Especially suitable for embedding in stable wall coating compoun...

Weißes Armierungsvlies VA 1035 auf einer Rolle
KLB-SYSTEM ZUBEHÖR Armierungsmatte VA 125 x 300

Glass fiber mat as inlay and reinforcement material for reactive resin coatings. To be used in combination with EP 699 S for producing robust, hygienic wall coatings. Please n...

Weißes Armierungsflies VA 1035 mit Struktur
KLB-SYSTEM ZUBEHÖR Armierungsvlies VA 1035

Light, tear-resistant reinforcement fabric as inlay for crack-bridging reactive resin coatings, e.g. PU 425 Comfort, PU 426, or also for flexibilised and hard acrylic and...

Sealing ribbons, sleeves and edges
Wandmanschette DB 1220 zur elastifizierenden Eindichtung von Bauteilen in der Wand
Wall sealing sleeve DB 1220

Elastified wall sleeve for components to be sealed in the wall area. To be glued in with the waterproofing. Compatible with epoxy resin and polyurethane.

Always at your service with professional advice

If you still have questions about our products or systems – please contact us. We will get in touch with you immediately.

Phone

Our competent KLB team will be happy to provide you with quick and straightforward personal advice on our coating systems.

General enquiries
+49 8223 96 92 0

Order hotline
+49 8223 96 92 222

Hotline for technical enquiries
+49 8223 96 92 333

Sales service
+49 8223 96 92 777











    *Recommended

    IMPORTANT NOTICE FOR USERS OF THE INTERNET EXPLORER
    The website is not optimised for use in your browser. This results in display errors and limited functionality. We recommend that you use one of the following free browsers for unrestricted use of our website.